Stream Intros & Overlays

Starting Soon Screen Twitch [2026]: 4 Countdown Timers

Starting Soon Screen Twitch [2026]: 4 Countdown Timers

A starting soon screen on Twitch needs a countdown that reaches zero at the right moment. In November 2026 you have four realistic ways to build one: a script that drives a text source in OBS Studio, a browser source, a StreamElements countdown, or Streamlabs tooling. For a stream with a fixed start time, a local browser source on OBS Studio 33.0.1 is the safest pick. For a stream that starts whenever you are ready, a simple script timer wins.

Twitch ships no countdown of its own. Twitch’s pricing page is about subscriptions, and the pages checked for this piece show no built-in starting soon timer, so the clock always comes from your broadcast software. Our earlier comparison of looping video, browser and still-image screens covered the format question. This article asks a narrower one: how should the numbers tick down?

Below you get a specs table with 13 rows, a pricing table, the published data worth knowing, six setups, a migration path for OBS 33, and a verdict. Every tool gets a short note on what the free tier covers, because free limits decide most of these choices.

The short answer: pick the timer by how your stream starts

Start with one question. Does your stream go live at a clock time, or after a fixed wait? A clock time (live at 7 p.m. Eastern, say) needs a timer that reads the system clock. A fixed wait (five minutes after you press Start Streaming) needs a timer that counts down from a set length. Most awkward starting soon screens come from mixing the two. The digits hit 00:00 and the streamer is still hunting for a headset.

Here is the quick mapping, with the reasoning in the sections that follow.

  • Scheduled show at a fixed clock time: browser source with a small HTML countdown pointed at a target timestamp.
  • Starting in a few minutes, no fixed time: an OBS script that drives a text source.
  • Viewers keep asking when you go live: a StreamElements countdown command, ideally paired with an on-screen timer.
  • You already live inside Streamlabs Desktop: stay there and use its scene tools instead of rebuilding in another app.
  • Console streaming with a capture card: check which app your setup runs on first, because Streamlabs Console is Xbox-only as of November 11, 2026.

One caveat before you pick. Twitch is no longer where most live watch time goes. The Streamlabs and Stream Hatchet Q2 2026 report puts YouTube Live at 60.3% of hours watched and Twitch at 21.0%. The countdown methods below run in OBS, so they work the same on YouTube Live, Kick or a multistream. Nothing here is Twitch-specific except the audience you are warming up.

What a starting soon screen on Twitch has to do

A good countdown does five jobs. It shows the time left in digits big enough to read on a phone. It keeps the right time when you switch scenes. It lands on zero when you actually go live. It does something at zero, whether that is a scene switch, a sound, or a stinger. And it costs close to nothing in CPU, because the screen runs while you are still setting up everything else.

Those five jobs are the scorecard for the whole comparison. If you want the full build of the screen around the timer (background, text, music, scene transitions), our 11-step starting soon screen walkthrough for OBS covers it. This article only deals with the clock.

Target time versus duration. A target-time timer stores a moment, such as 7:00 p.m. on a given date, and subtracts the current time every fraction of a second. If you refresh the source, restart OBS, or switch scenes ten times, it still shows the right answer. A duration timer stores a length, such as five minutes, and counts down from the moment it starts. Restart it and it begins again. Duration timers are simpler to build. Target-time timers are harder to break. Pick the one that matches how you announce your streams.

The zero-hour moment. What happens at zero matters more than most creators expect. A timer that sits on 00:00 tells viewers the stream is late. A timer that swaps to a LIVE label, or triggers a short intro sting into your main scene, tells them it started. If you want that sting to be a branded clip, the intro themes with listed resolution, length and frame rate are one place to see what a short opener looks like before you build your own.

Readability on small screens. Many viewers watch the waiting room on a phone. Use a heavy sans-serif font, a light colour on a dark or blurred background, and an outline or soft shadow so the digits stay legible over moving art. Avoid thin fonts and animated backgrounds that cross behind the numbers. If you have to squint at the preview window in OBS, your viewers will squint harder.

What OBS Studio 33.0 and 33.0.1 changed for countdown timers

OBS Studio 33.0 is the current major release on the project’s own site. The 33.0.0 build shipped on October 23, 2026, and 33.0.1 followed six days later on October 29. For countdown builders, the release notes carry one change that matters a lot: the embedded Chromium Embedded Framework (CEF) that powers browser sources and browser docks jumped from version 127 to version 150. The notes describe it as a large update, moving the browser engine from a July 2024 baseline to a September 2026 one.

In plain terms, an HTML countdown you write today runs on a much newer browser engine than the one OBS shipped a year ago. Modern JavaScript, newer CSS, and current fonts behave the way they do in a current desktop browser. That makes the browser source method easier to trust than it was on OBS 32.x.

Version 33.0.1 also fixed a crash that happened when logging into Twitch through OBS’s built-in integration. If you connect your Twitch account inside OBS to set the title and category from the app, that fix is the reason to be on 33.0.1 and not 33.0.0. Forum threads from late October and early November reported crashes and macOS trouble after the 33.x move. Treat those as unconfirmed reports, since the sources checked do not confirm a common cause.

Two more details from the release notes are worth knowing. Existing third-party plugins keep loading from their legacy locations until OBS Studio 34.0, so a countdown plugin you already use should not break on 33.x for loading reasons. And the macOS build requires macOS 13.0 or newer. Plugin compatibility is still catching up in practice. One third-party plugin, Zoominator, reportedly added OBS Studio 33 support on November 6, 2026, while another plugin listing updated between November 10 and 17 still advertised support for OBS versions 30 to 32.

What this means for you is simple. If your countdown is a script or a local HTML file, the upgrade is low risk. If it depends on a third-party plugin, read that plugin’s page before you update the machine you go live from.

Method 1: an OBS script driving a text source

This is the oldest approach and still the one with the fewest moving parts. OBS has a Scripts window under the Tools menu that loads Lua and Python scripts. A countdown script reads a duration, updates a named Text source every second, and can switch scenes when it reaches zero. Nothing leaves your computer, nothing needs a web connection, and the timer lives entirely inside OBS.

What you get on the free plan: everything. OBS Studio is free and open source, and scripts add no cost. The only price is setup time, which is a text source, a script file, and one settings dialog.

The strength of this method is reliability. There is no browser engine, no external page, and no URL that can go down on you. If your internet drops for ten seconds while you are warming up the stream, the timer keeps counting. That matters on a shaky home connection.

The weaknesses are design and flexibility. A Text source gives you a font, a colour, an outline, and maybe a drop shadow. It will not give you a spinning ring, a progress bar that fills, or a digit flip unless you stack extra sources by hand. Most scripts of this type count a duration, not a clock time, so restarting the script restarts the countdown. If you announce a 7 p.m. start, you have to press the button at exactly the right moment, which is a human step that fails on busy days.

Scripts also depend on the scripting runtime in your OBS build. After a major release like 33.0, check that the script still loads and that its Text source is still selected before you go live. A thirty-second dry run on a hidden scene catches almost everything. For the artwork behind the digits, the free Twitch overlay sources we compared list where to find backgrounds that do not carry a watermark.

Best for: streamers who go live when ready, run a simple scene, and want zero dependencies. Skip it if you need exact clock-time accuracy or animated digits.

Method 2: a browser source countdown

A browser source loads a web page inside OBS. The page can run JavaScript, so it can read the clock, count down to an exact target time, rotate text, and animate digits with CSS. The CEF 150 upgrade in OBS 33.0 makes this a current-engine option instead of a two-year-old one. The community resources section of the OBS Forums hosts tools such as VinciFlow Lower Thirds for OBS Studio, each with its own update history, which is a useful habit to copy: version your own countdown page so you know which copy is live.

What you get on the free plan: all of it. A local HTML file costs nothing to write or host. Hosted countdown pages from third parties often have free tiers with limits, so read the terms before you put a stranger’s URL on stream.

Here is a minimal target-time countdown. Save it as countdown.html, change the date to your next stream, and add it to OBS as a Browser source with the Local file box ticked.

<div id="t" style="font:700 160px sans-serif;color:#fff;
  text-align:center;margin-top:380px;text-shadow:0 0 12px #000"></div>
<script>
const target = new Date("2027-01-15T19:00:00-05:00");
function tick() {
  const s = Math.max(0, Math.floor((target - Date.now()) / 1000));
  const m = String(Math.floor(s / 60)).padStart(2, "0");
  const r = String(s % 60).padStart(2, "0");
  document.getElementById("t").textContent = s ? m + ":" + r : "LIVE";
}
tick();
setInterval(tick, 250);
</script>

The timestamp carries a UTC offset, so it means the same moment on every machine. The page checks the clock four times a second and recomputes from scratch each time, which means a refresh, a scene switch or a dropped frame cannot make it drift. The trade is a few lines of code. If you have never touched HTML, edit only the date string and leave the rest alone.

Two checkboxes in the browser source properties change behaviour. Refresh browser when scene becomes active restarts a duration-style page every time you switch to the scene, which is what you want for a fixed-wait timer and what you do not want for a target-time one. Shutdown source when not visible frees resources while the scene is off screen, and the page picks up from the correct time when it returns. For a target-time countdown, leave refresh off.

When a browser source countdown goes wrong, the cause is nearly always one of five things. Run down this list before you blame OBS.

  • Wrong UTC offset: the timer is off by a whole number of hours. Check the offset on the timestamp, and remember daylight saving changes it.
  • Date already passed: the page shows LIVE immediately. Update the date.
  • Local file path moved: the source goes blank after you rename a folder. Re-select the file.
  • Refresh setting on: a target-time page flickers on every scene change. Turn it off.
  • Digits cut off: the source is smaller than the page. Set the source to your canvas size.

Render settings

Match the browser source to your canvas so the digits do not stretch. If you are unsure which canvas size to use, our Twitch overlay size comparison breaks down the options.

SettingValueWhy
Source typeBrowser (local file for your own HTML)No hosting, works offline
Width1920Matches a 1080p canvas, and the width StreamElements lists for its overlays
Height1080Same canvas, no scaling
Frame rate30 or 60 FPSMatch your OBS output frame rate
Refresh on scene activeOff for target-time, on for durationPrevents a restart or forces a fresh count
Export formatNone (live source, not a rendered file)A looping video file is the alternative

Best for: scheduled streams, anyone who wants animated digits, and anyone who wants the timer to survive restarts. Skip it if you refuse to touch a line of code and prefer a visual editor.

Method 3: StreamElements countdown command and overlay

StreamElements covers two different ideas under the word countdown, and mixing them up costs time. The first is a chatbot command. A viewer types a command and the bot replies in chat with the time left until an event. The second is an overlay, a web page you add to OBS as a browser source. StreamElements overlays load that way. According to its docs, you add the overlay URL as an OBS Browser Source, normally at 1920 by 1080 and 30 or 60 FPS.

What you get on the free plan: the official StreamElements site describes its alerts and widgets as 100% free for live streamers.

The chatbot docs describe countdown commands that support either a recurring time of day or a single fixed date and time. The date must be a complete RFC 3339 timestamp. The documentation’s own example reads like this.

The community tournament starts in $(time.until 2027-09-20T19:00:00-03:00)

That gives you a clock-time countdown in chat with no code at all. The limit is obvious: it lives in chat, not on the starting soon screen. Viewers who arrive early and never open chat see nothing. The practical move is to pair it. Run an on-screen timer from Method 1 or Method 2, and give your chatbot the same target time so both answers agree.

StreamElements also offers SE.Live, which its documentation describes as a free OBS plugin that brings chat, the activity feed, media requests and multistreaming into OBS. On November 3, 2026, the developer docs added a channel.chat WebSocket topic that normalizes chat events from Twitch, YouTube, Kick and X. None of that changes how a countdown works, but it shows the platform is still being built out.

For a wider look at what the platform’s other free tools do, see our comparison of Twitch alert makers from Streamlabs, StreamElements and OWN3D. That piece covers alerts. This one is only about the clock.

Best for: channels that field the when-are-you-live question in chat a lot, and anyone who already runs StreamElements overlays. Skip it as your only timer, since a chat reply does not fill a screen.

Method 4: Streamlabs Desktop, the OBS plugin and Ultra

Streamlabs sells a suite, and a countdown is one scene element inside it. The company’s official pages describe Streamlabs Desktop for streaming and recording on Windows and macOS, a Streamlabs Plugin for OBS, Streamlabs Console, Talk Studio, a Podcast Editor and Cross Clip. Its content pages from November 11 and 12, 2026 describe the Ultra subscription as covering eight creator apps. Streamlabs is owned by Logitech, a fact stated in its announcement of a native Patreon integration.

What you get on the free plan: the sources checked confirm that Ultra is the paid bundle, and that Streamlabs Console carries a seven-day free trial. The exact monthly price is the one number to confirm on the official pricing page before you rely on it. A Streamlabs-run Cross Clip pricing page shows $27 per month alongside a stated $53 value, but that page does not say whether $27 is the standard Ultra price, a regional price or a promotion. Our OBS versus Streamlabs comparison goes through the plan split in more detail.

For countdown work, the question is whether you gain anything by leaving OBS. If you already stream from Streamlabs Desktop, the answer is no. You build a text or browser source in the same scene editor, and the countdown sits next to your overlays and alerts. If you stream from OBS today, switching apps just to get a timer is a lot of change for one feature, and a browser source does the same job for $0.

The console angle is the one place Streamlabs offers something OBS does not package for you. Streamlabs Console is active, offers a seven-day free trial, and is included with Ultra. The official page says it supports Xbox and does not currently support PlayStation, as of November 11, 2026. If you stream from a console, a capture card is the other route, and Streamlabs publishes a guide to capture cards for streaming that explains what the box does. Either way, the starting soon screen lives on your PC in OBS or Streamlabs Desktop, not on the console.

Best for: people already inside the Streamlabs ecosystem, or Xbox streamers who want the Console app. Skip it if your only goal is a countdown, because the other methods here cost nothing.

Specs and pricing side by side

The table below compares the four methods on 13 points. Where the sources checked do not confirm a detail, the cell says so instead of guessing.

SpecOBS scriptBrowser sourceStreamElementsStreamlabs
Where the timer runsInside OBSOBS embedded browser (CEF 150 in 33.0)Chat bot in the cloud, overlay as browser sourceStreamlabs Desktop or its OBS plugin
Current version checkedOBS Studio 33.0.1OBS Studio 33.0.1Cloud service, no version to trackNot confirmed
OwnerOBS ProjectOBS ProjectRazerLogitech
Software cost$0$0Alerts and widgets listed as freeUltra is a paid bundle
Account neededNoNo (local file)YesYes
Works offlineYesYes with a local fileNoNot confirmed
Fixed clock-time targetDepends on the scriptYes, through JavaScriptYes, in the chat commandNot confirmed
Fixed-duration timerYesYesNot through the commandNot confirmed
Shows on the stream screenYesYesOnly with an overlayYes
Shows in chatNoNoYesNot confirmed
Look and animationFont, colour, outlineAnything CSS can drawOverlay editor stylingScene editor styling
Skill neededLowLow to medium (a few lines of code)LowLow
Main failure modeScript fails to load after an updateWrong date or refresh settingOverlay URL or service outageApp or account issues

Cost is the second thing creators ask about, so here it is on its own.

OptionPriceWhat the free tier gives you
OBS Studio with a script$0Everything, with no watermark and no time limit
OBS Studio with a local browser source$0Everything, plus full control over the look
StreamElements overlays and widgetsListed as free on the official siteCustomizable alerts and widgets
StreamElements chatbot countdownListed as free on the official siteChat reply with the time left
Streamlabs ConsoleIncluded with UltraSeven-day free trial, Xbox only
Streamlabs UltraCheck streamlabs.com/pricingBundle of the Streamlabs apps

The pricing pattern is blunt. Two methods cost nothing for the whole life of the stream. One is free with a corporate owner and a terms update behind it. One bundles the timer into a subscription you may not need.

Benchmarks and industry data: what is published and what is not

No one has published a controlled benchmark of countdown timer drift or CPU cost across these four methods. The sources checked contain no such test, so this article does not invent one. What does exist is data about the platform you are warming an audience for, and data about how fast the software under your timer changes. Three sources are worth reading together.

Source 1: the Streamlabs and Stream Hatchet Q2 2026 Live Streaming Report. Total hours watched across tracked platforms reached 21.5 billion, up 0.1% on Q1 and 7.6% on Q2 2025. YouTube Live held 60.3% of hours watched, Twitch 21.0%, YouTube Gaming 8.3% and Kick 6.3%. Twitch hours watched dipped 0.7% quarter over quarter, and its year-over-year decline improved to 8.3% from 13.7% in Q1. Average concurrent viewership on Twitch declined 8.3% year over year, and Just Chatting stayed the top category at 670.5 million hours. The takeaway for a starting soon screen: the audience is large but flat, and a waiting viewer is one click from leaving.

Source 2: the OBS release record on GitHub. A release tracker counts 8 releases, 2 of them stable, for September and October 2026, and 7 releases, 3 of them stable, for June through August 2026. The 33.0 notes record the CEF jump from 127/6533 to 150/7871. Pre-release builds dated in late September and October 2026 sit between the 32.x line and the stable 33.0.0. For a countdown, the lesson is that OBS moves quickly. A timer that works today deserves a thirty-second test after each update.

Source 3: the StreamElements documentation. The overlay instructions describe a 1920-wide browser source, the chatbot docs specify RFC 3339 timestamps for fixed-date countdowns, and the developer changelog is dated November 3, 2026 for the latest chat change. This is documentation, not a measurement, but it tells you which settings the vendor itself supports.

A fourth data point comes from the OBS Forums. A thread reports that on 33.0.0 RC-2 a user could no longer dock panels to the left of, right of or below a scene. It has nothing to do with timers, but it shows what a release candidate cycle looks like in public. If you stream on a schedule, wait for a stable build and then a point release before you upgrade the machine you go live from.

Read together, the three sources point one way. The platform is big enough to be worth a polished waiting room, the software moves fast enough to break an untested one, and the vendors document their settings well enough that you can copy them without guessing. What is missing is measurement. If a reviewer ever publishes drift numbers for these timers, they would change the weight of the reliability points above. Until then, the reliability argument is a design one: a timer that recomputes from the clock cannot drift, and a timer that counts down by subtracting one each second can.

Real-world examples: six starting soon setups

Two of these come straight from vendor documentation and platform reports. The rest are labelled scenarios built from how the tools behave, not named channels. None of them is a claim about a specific streamer.

1. The StreamElements tournament countdown. The StreamElements chatbot docs use a community tournament as their example, with a fixed start written as a full RFC 3339 timestamp and a reply that reads The community tournament starts in, followed by the time left. It works because the timestamp includes an offset, so viewers in any time zone get the same answer. A scheduled event with a published start time is the best case for this method.

2. The recurring daily show. The same docs describe countdowns to a recurring time of day. A scenario: a channel that goes live at the same time every evening sets one chat command and one browser source. The browser source works out the next occurrence of that hour at load time, so no one edits a date each day. Chat and screen agree, and the streamer never touches either between shows.

3. The five-minutes-no-promises streamer. A scenario for the OBS script method: a streamer who goes live after dinner, whenever the kitchen is clean. She adds a Text source and a duration script, presses start, and switches scenes at zero by hand. No clock accuracy needed, no code, nothing to host. The failure mode is the human who forgets to press start, which is the argument for a clock-time timer on anything scheduled.

4. The chat-heavy variety stream. A scenario that combines two methods. The screen shows a browser source countdown, and chat has a bot command with the same timestamp. When a viewer asks whether the stream is live yet, the bot answers and the screen agrees. Pair this with the chat overlay setup in our guide to a Twitch chat overlay in OBS so early arrivals can talk to each other while they wait.

5. The Xbox streamer. As of November 11, 2026, Streamlabs Console supports Xbox and does not currently support PlayStation, per its own page. A scenario: an Xbox player using Console for the game feed still builds the starting soon scene in Streamlabs Desktop or OBS on a PC, because the console does not render overlays on its own. The countdown method is a PC question.

6. The upgrade-day surprise. A scenario drawn from the plugin record. A creator updates to OBS 33 on the morning of a big stream, and a plugin that drives the countdown still lists support for OBS 30 to 32. Even though legacy plugin paths keep loading until OBS 34.0, support text and real behaviour can differ. The fix is boring and works: run the starting soon scene for thirty seconds on the new build before the stream, not during it.

Use-case picks: which timer for which stream

Seven recommendations follow. If your use case needs more than a timer, browse the full stream intros and overlays archive.

  • Scheduled weekly show: browser source with a target timestamp. It survives restarts and shows the same time everywhere. Add a chat command with the same date.
  • Daily stream at a regular hour: browser source that computes the next occurrence of that hour, plus a StreamElements recurring-time command.
  • Spontaneous stream: OBS script and a Text source. Fewer parts, fewer ways to fail.
  • Event or tournament with a hard start: target-time browser source on the stream, StreamElements command in chat, both pointing at one RFC 3339 timestamp.
  • Beginner with no coding comfort: start with the script method or a ready-made overlay, then move to the HTML file once you have seen it run once.
  • Streamlabs Desktop user: stay put and use its scene tools. Switching apps for a timer is not worth it.
  • Branded channel with a custom opener: any timer that ends in a scene switch, then a short branded sting at zero. A logo animation theme is one way to see how a short logo reveal can fill that gap.

A rule of thumb holds across all seven: put the real go-live time in your stream title and your socials, and make the screen match. A creative countdown with the wrong time on it does more damage than a plain one that is correct.

Migration guide: moving a starting soon screen to OBS 33

Most creators are not starting from zero. They have a looping video or a still image with a hand-edited starting soon label, and they want a real timer on top. This guide covers the two most common moves.

From a looping video or still image to a live countdown

Keep your background. Your video or image stays as the bottom layer of the scene. Add the timer as a new source above it and leave the background alone. Then follow these steps.

  1. Install or update to OBS Studio 33.0.1 and open your starting soon scene.
  2. Decide target time or duration, using the rule at the top of this article.
  3. Add a Browser source (local file) or a Text source with a script.
  4. Set the browser source to 1920 by 1080 if your canvas is 1080p, and position it over the background.
  5. Test on a hidden scene for thirty seconds, then switch scenes back and forth five times to confirm the time holds.
  6. Add a scene switch or short sting at zero so the stream visibly starts.

From a Streamlabs or StreamElements overlay to your own

If your countdown currently lives in a hosted overlay, copying its look into a local HTML file takes a short afternoon. Screenshot the overlay, note its font and colours, and recreate the digits in the HTML page. You trade the visual editor for independence from a third-party URL. If you would rather keep the hosted overlay, nothing forces a move. StreamElements overlays load in OBS as browser sources, and OBS 33.0.1 runs them on the newer engine without changes on your side.

Before any migration, back up your OBS scene collection from the Scene Collection menu, so a mistake costs you a minute and not an evening. Check your plugins against 33.x, and remember that third-party plugins keep loading from legacy locations until OBS Studio 34.0, as the release notes state. After the move, keep the old overlay URL in a note for a week. If the new timer misbehaves on a live night, you can switch back in one click.

Pros and cons of each countdown method

OBS script with a text source

  • Pro: no internet, no browser engine, no external URL.
  • Pro: free, and one of the lightest options on a loaded PC.
  • Con: limited styling beyond a font, colour and outline.
  • Con: usually counts a duration, so a restart restarts the clock.

Browser source with your own HTML

  • Pro: exact clock-time target that survives scene switches and restarts.
  • Pro: unlimited animation through CSS, now on the CEF 150 engine in OBS 33.0.
  • Con: a few lines of code, and a wrong date string is easy to make.
  • Con: browser sources use more resources than a plain text source.

StreamElements command and overlay

  • Pro: chat answers with a clock-time countdown and no code.
  • Pro: alerts and widgets listed as free.
  • Con: the chat command does not fill the starting soon screen.
  • Con: depends on a third-party cloud service, so your countdown is only as reliable as that service and its terms.

Streamlabs Desktop and Ultra

  • Pro: one app for scenes, overlays and a console option for Xbox.
  • Pro: Console has a seven-day free trial.
  • Con: paid bundle pricing that needs checking on the official page.
  • Con: too much machinery if all you want is a clock.

Verdict: browser source for scheduled streams, script for the rest

For a starting soon screen on Twitch in late 2026, the best default is a local browser source with a target-time timestamp, running on OBS Studio 33.0.1. It costs $0, shows the same time on every machine, survives scene switches and restarts, and now sits on a browser engine moved from CEF 127 to CEF 150. The cost is a few lines of HTML that you edit once per stream.

If you stream whenever you are ready, a script-driven text source is simpler and just as free. If your viewers keep asking in chat when you go live, add a StreamElements countdown command with the same timestamp as your screen. Treat Streamlabs as the right choice only when you already live in its apps or need its Xbox Console app.

The data behind that call is plain. The Q2 2026 Streamlabs and Stream Hatchet report shows Twitch at 21.0% of hours watched and down 8.3% year over year in average concurrent viewers, so every waiting viewer counts. OBS shipped 33.0.0 on October 23 and 33.0.1 on October 29, 2026, and the second one fixed a Twitch-login crash. And no published test says any method drifts less than another, so choose on workflow, not on a number nobody measured.

Questions creators ask

Does Twitch have a built-in countdown for a starting soon screen?

The pages checked for this article show no native Twitch countdown timer. The clock comes from OBS Studio, a browser source, a chatbot command or Streamlabs tooling.

Which method is most reliable on OBS Studio 33.0.1?

A local browser source with a fixed timestamp, because it recomputes the time from the clock on every tick. An OBS script is just as dependable when you only need a duration.

Is the browser source safe after the OBS 33 browser engine update?

The 33.0 notes describe the move from CEF 127 to CEF 150 as a large update, and a plain HTML countdown uses features current browsers support well. Test it once on the new build before a live show.

Can I show the countdown in chat as well as on screen?

Yes. StreamElements chatbot docs describe countdown commands for a recurring time of day or a fixed date and time. Use the same timestamp as your on-screen timer.

Do I need Streamlabs Ultra for a countdown?

No. Ultra is a bundle of Streamlabs apps. A countdown is possible with free OBS tools, so check the Streamlabs pricing page before paying for the bundle.

What size should the countdown source be?

Match your canvas. On a 1080p canvas, set the browser source to 1920 by 1080, the same width StreamElements lists for its overlays.

Does the same countdown work on YouTube Live or Kick?

Yes. The timer lives in OBS, not in Twitch, so it works on any platform you stream to. The Q2 2026 Streamlabs and Stream Hatchet report puts YouTube Live at 60.3% of hours watched, so the same screen will serve a multistream.

More from the Vipid blog

Make it with Vipid

Theo Vance

Intros & Templates Editor · Vipid Team

Theo Vance is the Intros & Templates Editor at Vipid, where he covers intro and outro makers, template libraries for CapCut, Canva and the major editors, slideshow and video-card tools, and stream starting screens. He compares makers on what matters before you hit render: watermark, export resolution, length limits, licence and price, and dates every check. He also looks after the Vipid theme archive, the 2011–2016 intros the site was built on.

All articles by Theo Vance ›   How we check tools ›

Keep reading

TwitchCon [2026]: Serafim AI Highlights, Booth 1514
Stream Intros & Overlays

TwitchCon [2026]: Serafim AI Highlights, Booth 1514

Theo Vance·14 Nov 2026
OBS Studio Update [2026]: 33.0.1 vs 32.2, Both $0
OBS & Screen Recording

OBS Studio Update [2026]: 33.0.1 vs 32.2, Both $0

Jonah Reyes·17 Nov 2026
Screen Recorder for Mac [2026]: $0 vs $108/yr
OBS & Screen Recording

Screen Recorder for Mac [2026]: $0 vs $108/yr

Jonah Reyes·5 Nov 2026

Blog

Intros & Templates
Titles & Motion
Streaming
Editing & Export
AI Video

Vipid

About Vipid
Themes
News archive 2011–2016
Vipid Team

Editorial

Editorial policy
How we check tools
Corrections

Legal

Privacy policy
Terms of service
Making video intros since 2010.
The Vipid blog covers the tools behind them.